Installing an exhaust gas recirculation (EGR) valve on your Ford vehicle is a simple procedure. You’ll need a minimal of tools, a new valve gasket and these easy steps. This information applies to most Ford vehicles. For those who want some specific info for your particular vehicle, consult your automobile service manual.
Ford EGR Valve Replacement Instructions
1. Park your vehicle in a protected place and open the hood. Ensure that the engine and exhaust system are cool enough to the touch to avoid pores and skin burns.
2. Remove the engine cover in case your automobile is equipped with one. You might want a wrench or ratchet and socket.
3. Remove the air intake assembly from the highest of the engine to succeed in the EGR valve if necessary. Locate the EGR valve on one aspect of the engine. Most valves resemble a wide and flat metal mushroom, between 1 and a couple of inches in diameter. You’ll be able to determine the valve by the metal pipe linked between the exhaust manifold and the valve, which is seating on one aspect of the intake manifold.
4. Disconnect the vacuum hose or hoses from the top of the valve by hand. Also, unplug the electrical connector from the top of the valve if your explicit model is equipped with an digital or digital valve.
5. Remove the threaded becoming between the EGR valve and connecting pipe using a wrench or adjustable wrench. Then take away the two mounting bolts utilizing a wrench or ratchet and socket.
6. Discard the outdated gasket and clear the intake and valve mounting surfaces from outdated gasket material utilizing a plastic scraper, if you’re reinstalling the same EGR valve.
7. Set up the EGR valve in place using a new valve gasket and start the mounting bolts by hand however don’t tighten them yet. Start the pipe threaded fitting by hand to keep away from harm to the threads. Then tighten the mounting bolts and threaded nut. Connect the vacuum hose or hoses and plug the electrical connector.
8. Set up the air consumption meeting and engine cover.
